|
Steel Pivot Ball 8.4mm (2)
#337250
Steel 8.4mm pivot balls hardened and ultra-precisely hand ground for very high durability and long life. Set of 2.
|
|
|
Composite Adjusting Nut with Ball Cup (4)
#337253
Composite M10 adjusting nut for capturing pivot balls in front steering blocks and rear uprights. Lighter than standard nut, easier mounting and usability. Fine tuning for serious racers. Set of 4.
|
|
|
Composite Set of Ball-Bearing Bushings (2)
#342070
Set of molded composite ball-bearing bushings â“ eccentric bushing for bulkheads, concentric and eccentric bushing for front steering block or rear upright. Eccentric bushings in steering blocks and rear uprights allow for roll center and caster adjustment.
|
|
|
Composite Suspension Arm Front Upper - Short
#342131
Front upper suspension arm made from tough molded composite material, works on either left or right side. The arm was shortened to allow for narrower front track-width for more steering.
|
|
|
Composite Steering Block for Graphite Extension - Right
#342213
Molded composite RIGHT steering block, marked âśRâť for easy identification. Front steering block features concentric and eccentric bushings for roll center adjustment as well as positive caster adjustment. For use with #342290 Graphite Extension for Steering Block.
|
|
|
Composite Steering Block for Graphite Extension - Left
#342223
Molded composite LEFT steering block, marked âśLâť for easy identification. Front steering block features concentric and eccentric bushings for roll center adjustment as well as positive caster adjustment. For use with #342290 Graphite Extension for Steering Block.
|
|
|
Graphite Extension for Steering Block (2)
#342290
Steering block graphite extension, works on either left or right side. For use with # 342213 and #342223 Composite Steering Block for Graphite Extension (Right, Left). Allows 2 different Ackermann positions adjustment for fine tuning on all surfaces and track conditions.
|
|
|
Anti-Roll Bar Front Female - HUDY Spring Steel™
#342440
Female front anti-roll bar CNC-machined from world-renowned HUDY Spring Steel™ for long lifespan. For use with #342450 male front anti-roll bar. The hand-ground front anti-roll bar blades are easily adjusted using a 1.5mm hex wrench.
|
|
|
Anti-Roll Bar Front Male - HUDY Spring Steel™
#342450
Male front anti-roll bar CNC-machined from world-renowned HUDY Spring Steel™ for long lifespan. For use with #342440 female front anti-roll bar. The hand-ground front anti-roll bar blades are easily adjusted using a 1.5mm hex wrench.
|
|
|
Front Drive Axle - HUDY Spring Steel™
#345210
Front CVD wheel axle made from world-renown HUDY Spring Steel™. Strategically machined for toughness and light weight without compromising strength. The wheel axle of the CVD is additionally hand ground for maximum precision to ensure a perfect precise fit in suspension ball-bearings, guaranteeing perfect wobble-free fit and rotation. Heat treated for maximum strength, durability, minimal wear, and extra-long lifespan.
|
|
|
Front CVD Drive Shaft 63mm - HUDY Spring Steel
#345220
CNC-machined CVD front drive shaft made from world-renown HUDY Spring Steel. Strategically-machined, the lightweight drive shaft has been weight-reduced without compromising strength. Hand ground for maximum precision, then individually measured and inspected.
|
|
|
Wheel Spring (2)
#345280
Wire springs for providing positive pressure on wheel locks. Set of 2.
|
|
|
Pin 2.5x12 (10)
#980262
Polished chrome pin. Dia. x length = 2.5mm x 12mm. Set of 10.
|
|
|
Pin 3x20 (10)
#980320
Polished chrome pin. Dia. x length = 3mm x 20mm. Set of 10.
|
|
ID |
Product Name |
Released |
345260-O |
|
Mar. 27, 2013 |
342111 |
|
Feb. 27, 2012 |
342131 |
|
Feb. 27, 2012 |
342190 |
|
Feb. 27, 2012 |
342213 |
|
Feb. 27, 2012 |
342223 |
|
Feb. 27, 2012 |
342290 |
|
Feb. 27, 2012 |
901306 |
|
Feb. 23, 2011 |
980262 |
|
Feb. 23, 2011 |
980320 |
|
Feb. 23, 2011 |
342070 |
|
Feb. 17, 2011 |
342410 |
|
Feb. 17, 2011 |
342440 |
|
Feb. 17, 2011 |
342450 |
|
Feb. 17, 2011 |
345210 |
|
Feb. 17, 2011 |
345220 |
|
Feb. 17, 2011 |
345230 |
|
Feb. 17, 2011 |
345280 |
|
Feb. 17, 2011 |
941218 |
|
Feb. 17, 2011 |
962121 |
|
Feb. 17, 2011 |
| |
|
|